PCB design services involve specialized activities aimed at creating an optimum printed circuit board layout using CAD software and other specialized PCB design tools. There are different kinds of PCBs and the process for each one may vary a bit. Regardless of the type of board or layout, though, it's always going to be roughly the same multi-stage designing process that begins with schematic capture.
Information about three key aspects of the project must be provided by the client to the designer. The schematic is obviously the most important thing. Note that it may also be in the netlist format. The netlist file contains the circuit's connectivity details and descriptions for the components.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
There are many intermediate techniques used in several stages that build on the schematic or netlist. These functions include things such as library development, signal integrity checks, stress analysis, thermal simulation and EMI checking. All this leads up to the generation of the gerber file. This is the most commonly used format used for transferring complete PCB images ready for manufacturing.
Electrical and electronics circuit designers are expected to be able to work with and create complex designs for digital, analog, RF and mixed PCBs. The boards themselves may be single or double sided or multi-layered. They can be designed to match the customer's needs in different sizes with varying pin densities and component quantities.
The designer also has to decide the board characteristics. This is the method that must be used for mounting components and creating circuit traces. The most popular technique that is now in use is called surface-mount technology.
Using this surface-mount technique, the end caps are directly soldered now on the same side of the board. This new method has almost completely replaced the earlier through-hole boards. In these older boards, leads were inserted from one side of the board and soldered onto traces on the other side.
Apart from the schematic capture and subsequent board designing steps, the designer may also be called upon to evaluate existing designs, components and footprint captures. Sometimes they're also involved in prototype procurement, and may be asked to do availability checks and collect pricing information against the BOM.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
Information about three key aspects of the project must be provided by the client to the designer. The schematic is obviously the most important thing. Note that it may also be in the netlist format. The netlist file contains the circuit's connectivity details and descriptions for the components.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
There are many intermediate techniques used in several stages that build on the schematic or netlist. These functions include things such as library development, signal integrity checks, stress analysis, thermal simulation and EMI checking. All this leads up to the generation of the gerber file. This is the most commonly used format used for transferring complete PCB images ready for manufacturing.
Electrical and electronics circuit designers are expected to be able to work with and create complex designs for digital, analog, RF and mixed PCBs. The boards themselves may be single or double sided or multi-layered. They can be designed to match the customer's needs in different sizes with varying pin densities and component quantities.
The designer also has to decide the board characteristics. This is the method that must be used for mounting components and creating circuit traces. The most popular technique that is now in use is called surface-mount technology.
Using this surface-mount technique, the end caps are directly soldered now on the same side of the board. This new method has almost completely replaced the earlier through-hole boards. In these older boards, leads were inserted from one side of the board and soldered onto traces on the other side.
Apart from the schematic capture and subsequent board designing steps, the designer may also be called upon to evaluate existing designs, components and footprint captures. Sometimes they're also involved in prototype procurement, and may be asked to do availability checks and collect pricing information against the BOM.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
About the Author:
You can visit the website www.tritecdesign.com for more helpful information about PCB Design Services For Electronics Manufacturers
ليست هناك تعليقات:
إرسال تعليق