What You Need To Know About The Monopulse Comparator And Radars In General

By Elaine Guthrie


If you are interested in military or aviation technology, you see one piece of equipment mentioned time and time again. Radar (short for Radio Detection And Ranging) is a way of locating objects and telling important information such as the direction in which those objects are traveling, how far away they are from a given point and how fast the object is traveling. The monopulse comparator is an important component of modern radar systems and has done much to make these systems more reliable and accurate.

Radar systems were first developed and used by the military. Various countries found it very helpful to be able to detect approaching objects, find out how fast they were moving and what direction they were moving in. It allowed them to detect potential incoming attacks while paying less attention to non-hostile objects or aircraft. Now these systems are used by many different groups and organizations.

Meteorologists have also started using these systems to monitor the weather and create forecasts. They can be very helpful if a severe weather system is expected. Radar can be used to determine how large or severe a storm such as a hurricane or a tornado is. Other types of storms such as blizzards and thunderstorms can also be mapped using these systems.

When you are out at sea it can be difficult to determine your location when visibility is poor. Using a radar system will allow a ship to bounce signals off of known reference points. Marine buoys and the shoreline can both be used as reference points for a ship. The same system is also used to scan around the vessel to detect the presence of other vessels. This can help avoid collisions between two or more ships.

All systems are made up of the same basic components. Frequencies are generated by a transmitter. There are several different types of these, some of which are more suitable for specific uses than others. The frequency is sent to an antenna by a waveguide. Then, the antenna sends out the signal. A duplexer switches the antenna over into receiving mode so the returning radio waves can be interpreted. This is done using a receiver and the operator will see the results on a display processor.

In the beginning, the way the signal was generated and processed meant that radar systems were not as reliable or accurate as they are today. They could be jammed easily. This involves directing the same radio frequency at the system in order to give an inaccurate picture of what is going on in the area. With the invention of the monopulse system, this was corrected and new systems are much more accurate.

Splitting a beam of radio frequency into several portions really improves accuracy. This is because the different sections of the beam can be compared to find out if the result are accurate. A monopulse system can compare up to four different sections of frequency and the operator will get an excellent idea of what is out there and how it is moving.

These tend to be very specialized items and may not be commonly available. There are websites that offer different versions of comparators. If you are purchasing this type of item, it is important to read the description carefully and ensure you are purchasing the right kind of comparator.




About the Author:



ليست هناك تعليقات: